Installation Guide Owner manual
NET SatisFAXtion 8.7 Installation Guide — Page 6
Eicon Diva Server
Your Eicon Diva Server hardware will have come with a driver CD. Please have it ready prior to installing your Eicon hardware,
or download the latest drivers from http://www.eicon.com/.
Power o your server and install the Eicon Diva Server card.
Power the server on. e Windows Found New Hardware wizard will start. is cannot be used to install the driver. Click
Cancel.
Locate and run the Setup.exe on the Eicon Diva Server CD or in the folder where the downloaded drivers were extracted. A
simple wizard will open that will install the required les.
Do not check the “Run customized installation wizard” checkbox. You will want a default driver install.
Click Next and then Finish. e installer will reboot the server.
After the server has rebooted, run the Diva Server Conguration Manager.
Congure the card and line as appropriate. Congure a fax modem pool as the top-most device. e number of modems should
be equal to the number of T1 or PRI channels. Save, then activate the conguration. e Diva Server Conguration Manager will
create the requested number of modem devices, then reboot the server.
You are now ready to install NET SatisFAXtion. Proceed to “2. Installing NET SatisFAXtion.”