Manual

4 – Appendices NET SatisFAXtion 8.7 Manual 217
compressed_font [string]: Font used for compressed text document conver-
sion. Default: {ProgramPath}\Fonts\compress.fnt.
normal_font [string]: Font used for plain text document conversion. Default:
{ProgramPath}\Fonts\normal.fnt.
4.2.1.5 IP_FAX Global
allowed_receive_baud_rates [string]: This setting constrains a modem to use
only certain baud rates. Use this to block a modem from using a rate or rates
that it supports, but are unreliable in your environment or are undesirable for
some other reason. On transmitting, use this as a mask; the modem will use
only those rates you list. On receiving, set the fastest and slowest rates; the
modem will allow those and any in between. Format: Comma separated list of
14400, 12000, 9600, 7200, 4800 and 2400. Default:
14400,12000,9600,7200,4800,2400.
allowed_send_baud_rates [string]: This setting constrains a modem to use
only certain baud rates. Use this to block a modem from using a rate or rates
that it supports, but are unreliable in your environment or are undesirable for
some other reason. On transmitting, use this as a mask; the modem will use
only those rates you list. On receiving, set the fastest and slowest rates; the
modem will allow those and any in between. Format: Comma separated list of
14400, 12000, 9600, 7200, 4800 and 2400. Default:
14400,12000,9600,7200,4800,2400.
allowed_receive_image_types [string]: These settings control the image
types that the device can send and receive via the T.30 protocol over the tele-
phone network. To receive or send some image types, the corresponding al-
lowed_receive/send_transfer_type setting must include ECM. Format:
Comma separated list of the following. Default: 1D,2D,T6,JBIG.
1D
2D
T6
JPEG
JBIG
COLOR
200H_400V
300H_300V
400H_400V
allowed_receive_transfer_types [string]: These settings control the type of
fax and file transfers that the driver can perform for a device. Format: Comma
separated list of the following. Default: FAX,ECM,V34.
FAX
ECM
V34
allowed_send_image_types [string]: These settings control the image types
that the device can send and receive via the T.30 protocol over the telephone
network. To receive or send some image types, the corresponding