Manual

4 – Appendices NET SatisFAXtion 8.7 Manual 197
dont_delete_zero_page_faxes [boolean]: By default the fax server disre-
gards non-fax calls: if there are zero pages received and no remote CSID and
this value is false, then the fax event will be deleted with no record that it
ever occurred. If true, the call will be logged and potentially a blank “fax” with
no fax image will be delivered to the user. Default: false.
dont_retry_errors [string]: This allows customization of the ICANFax send
retry policy. If fax sends fails due to an error that ICANFax normally does a
retry on, this setting can make that error not retry. Format: Up to 10 comma-
separated hexadecimal numbers.
emulate_cas_file_xfer
failed_send_retry_attempts [dword 0–255]: The number of retry attempts
to make when a fax send fails for any “retryable” reason. Retry attempts will
not occur for manual sends. For lists of error codes that represent “retryable”
errors, see 4.1) Error Code Reference. Default: 3.
fax_driver_name [string]: Device name that will override the key name that is
used for the fax device name. This needs to match a key or fax_device_name
from the driver specified by fax_driver_name. This would really only need to be
different when using the device# key name ordering option of ICANFax. For-
mat: One of the following values:
BOS_MAN
BT_MAN
CLASS1
CLASS2
GAMMAFAX
IP_FAX
PLUGIN_FAX_W32
SATISFAX
filebase_memory_only [boolean]: When the FILEBASE queue driver is en-
abled, causes the queue to be stored in memory for maximum performance.
Provides zero recovery if the system were to be shutdown in a unfriendly man-
ner since the queue will be lost.
filebase_on [boolean]: Turns on/off the storage of queue files in an optimized
database. Provides no benefit for systems running with under 300 ports. Note
that the bypass_filebase setting overrides this one. Set bypass_filebase to
false for this setting to have any effect. Default: false.
force_standard_resolution_sends [boolean]: When this setting is true, then
no matter whether a send fax is submitted to go out as FINE, it will always be
force to go out as coarse (aka standard) resolution. Default: false.
global_comm_state [string]: Enables ICANFax to send/receive when it is
loaded. The default is to not do either since higher level modules need to parse
the ICANFax queues without ICANFax interfering. Format: Comma-separated
list of SEND and RECEIVE. Default: SEND, RECEIVE.
global_debug_show_output [string]
global_debug_show_file_path [string]: Partial path or complete path and file
name of where to create debug file. If the debug_show_output is set for CON-