User Manual

NET SatisFAXtion 8.6 AudioCodes MediaPack Hardware Installation Guide — Page 2
Installing AudioCodes MediaPack Hardware
Unpack your AudioCodes MediaPack. Plug in the Ethernet cable and the phone lines, but do not plug in the power at this time.
Installing NET SatisFAXtion
Install NET SatisFAXtion according to the normal instructions. However, there are some steps that must be changed:
Setup will ask you to identify what hardware you have installed. Select AudioCodes VoIP Gateways.
Next, Setup will allow you to assign an IP address to a new AudioCodes Gateway.