User guide

Fax Machine Integration Server Installation Guide — Page 11
Enter the DID from the worksheet that corresponds to this port in the “User ID” field. Optionally, set the display name (it is
useful to set this to the User Name from the worksheet for future reference).
Click OK. is will take you back to the Line Settings tab, above. Repeat the process to configure the other line, if it will be
used.
Enabling Remote Management
By default, the MP202 can only be managed from the LAN port, and most implementations do not have anything attached to
the LAN port. To enable WAN port management, click the “Advanced” link on the left side of the page and then click on “Remote
Administration.” Under the “Allow Incoming Access to the Web-Management” section, check the “Using Primary HTTP Port
(80)” box. Optionally, you can enable “Using Primary HTTPS Port” in addition or instead of the Primary HTTP Port, to enable
management via HTTPS.
Click OK. You can now unplug the computer from the LAN port, and plug the normal network into the WAN port. Insure you
can connect to the MP202’s web interface via its IP address.