AudioCodes Fax Connector For NET SatisFAXtion SBE / EE Basic Fax ATA Configuration Guide Revision 1.1 Fax Connector – Basic Fax ATA Configuration Guide rev 1.
REQUIREMENTS – The following are required to install the Fax Connector Supported Microsoft Windows Operating System o Windows XP o Windows Server 2003 o Windows 7 / 8 (except home versions) o Windows Server 2008 SP2 o Windows Server 2008 r2 o Windows Server 2012 Note: If you are installing on Windows Server 2008 SP2 or Windows 2008 r2 you need to install dotNET Framework v3.51 before installing the Fax Connector Live connection to the internet Net SatisFAXtion version 8.7r3 (8.7.
Installation Videos – Basic Installation Video http://www.youtube.com/watch?v=jffa7nGhT1M&feature=youtu.be – Basic Configuration Video Configuration Options The following list shows your configuration options based on your product key.
Basic Configuration The following covers how to create accounts and manually configuring the Fax ATA for that account. Start the Fax Connector Administration Web User Interface - (Start, All Programs, ATA Connector, Administration) Login to the Fax ATA Connector Administration page o This is same as the Net SatisFAXtion Admin username and password Fax Connector – Basic Fax ATA Configuration Guide rev 1.
Administration page - Click on the Accounts link on the left Fax Connector – Basic Fax ATA Configuration Guide rev 1.
Accounts page - Click the Add button on the upper right, this will open a configuration window. Fax Connector – Basic Fax ATA Configuration Guide rev 1.
Account Creation Screen - Enter the ATA Serial Number Enter the Account Name Enter the Account Password Next, click the Line 1 tab Fax Connector – Basic Fax ATA Configuration Guide rev 1.
Account Creation Screen - Enter the DID: o The Caller ID and CSID will automatically be filled in Next, scroll down to seem more options in the Line 1 tab - Fax Connector – Basic Fax ATA Configuration Guide rev 1.
Options in the Line 1 tab - These options are discussed in detail in the Technical document Fax Connector – Basic Fax ATA Configuration Guide rev 1.
Accounts screen after configuring a Fax ATA Account - The initial status will be offline (red) until a Fax ATA is configured and is able to log in The next step is to configure a Fax ATA Fax Connector – Basic Fax ATA Configuration Guide rev 1.
Fax ATA Login Screen The Fax ATA can be administered from its WAN port over your network. Connect the WAN port to your network and wait about a minute for it to obtain an IP address from your DHCP Server. Connect an analog phone of the handset of your fax machine to Phone 1 on the back of the Fax ATA. Go off hook and listen for dial tone. Dial *2* and wait several seconds. The Fax ATA will play the IP address back to you. Write down this IP address.
Configure the Line Settings - Click on Voice Over IP menu choice on the left Next, click on the Line Settings tab This is the initial Line Settings o Uncheck the checkmark next to the line 2 o Next, click on the icon under the action section in the Line 1 row Fax Connector – Basic Fax ATA Configuration Guide rev 1.
Configure the User ID, this is the same as the DID - Please refer to Appendix B Enter in the User ID: - this will match the DID in the Fax Connector Account Line 1 Settings Fax Connector – Basic Fax ATA Configuration Guide rev 1.
This is what the initial Line Settings should look like - This configuration is for only 1 fax machine to be connected to Line 1 o Please see the technical documentation on adding a second line Fax Connector – Basic Fax ATA Configuration Guide rev 1.
Configue the HTTPS settings - Click on the HTTPS Fax Connections tab o Please refer to Appendix A o Enter the User Name: - this is the same as the Account Name o Enter the Password: - this is the same as the Account Password o Enter the Server Logon URL: - this can be found of the front page of the Fax Connector Admin page Once it is configured, the Fax ATA will show online (green) and it is ready for faxing. Fax Connector – Basic Fax ATA Configuration Guide rev 1.
Appendix A – Diagram of corresponding fields between the Fax ATA HTTPS settings and Fax Connector Fax Connector – Basic Fax ATA Configuration Guide rev 1.
Appendix B – Diagram of corresponding fields between the Fax ATA Line settings and Fax Connector Fax Connector – Basic Fax ATA Configuration Guide rev 1.
