Installation Guide

Figure 3:
D. Making Electrical Connections
If you wish to hard wire the power supply directly to the AC mains, have a qualified electrician connect the line voltage to the input side
of the power supply in accordance with national, state and local electrical codes using an appropriate junction box (not included).
1) Isolate from the mains supply before installation
2) Wire the LED fixture onto the DC output of the driver using the pigtail.
RED= positive
BLACK= negative
3) Wire the input to AC 120 line/mains
WHITE- neutral
BLACK= line or hot
OR
BLUE= neutral
BROWN= line or hot
4) A standard TRIAC dimmer may be used on the AC/line side if a dimmable driver has been used.
Limited Warranty
Favorite Monkey (the “Manufacturer”) warrants to the original buyer, with proof of purchase, (the “Buyer”) that each product
manufactured and sold by Manufacturer (the “Product”) will be free from defects in the material and workmanship in its intended use
(normal wear and tear excepted).This warranty covers Manufacturer’s LED components operated on Manufacturer power supplies for
a period of FIVE YEARS from the invoice date from Manufacturer. This warranty does not cover damage caused by tampering with or
unauthorized use of or abnormal stress of the product. Unauthorized use or abnormal use or stress includes operation or use of the
product in an operating environment that exceeds the limitations specified in the Manufacturer’s specifications. This warranty applies
to the Buyer. If you have any questions or concerns, please contact Favorite Monkey.
For installation assistance or additional parts please contact:
[e-mail]
888-908-3521