User’s Manual In-Vehicle Infotainment System No.
Copyright ★★★★ Copyright The copyright of this manual is reserved by our company. All rights are reserved.This manual can not be copied, reproduced or translated in whole or in part without the express written permission of our company. Our company reserves the right to improve the product, and its hardware and software. This manual is an operating guide, but not the warranty of the product. Our company doesn't guarantee the contents included in this manual.
Precautions Safety Precautions ① To ensure the traffic safety and avoid contravening the traffic regulations, please obey the local laws while the Bluetooth or any other options are working. And do not watch any programs or operate the system during driving. ② For safety and correct operation of the product, the product shall be installed by professional. Do not disassemble or repair the system by yourself to avoid an accident or damage to the system.
FCC ID Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
EU Declaration of Conformity for RED Directive2014/53/EU We, (Manufacturer name) Faurecia Coagent Electronics Science and Technology Co., Ltd. hereby, declare that the essential requirements set out in the RED Directive 2014/53/EU have been fully fulfilled on our product with indication below: Product Name: In-Vehicle Infotainment System Brand Name: N/A Model No.: CA9012-NR The following standards have been applied for the investigation of compliance: ETSI EN 301 489-1 V2.1.1: 2017 ETSI EN 301 489-9 V2.1.
Contents (If there is no icon, it means there is no corresponding functions) 1 Touch Button Definition-----------------------------------------------------------01 2 Basic Operation------------------------------------------------------------------02 3 RADIO Function Operation-------------------------------------------------------03 4 MEDIA Function Operation-------------------------------------------------------04 5 Phone Function Operation-------------------------------------------------------05 6 Setting
1. Touch Button Definition 1 The receiver of the bluetooth hands-free function for bluetooth voice communication. 6 Button for reset. 2 Press this button to enter the mode of display off. And press the button against or touch the screen can wake up the screen display. 7 After connecting CarPlay, activation SIRI. After connecting AndroidAuto, activation Ok Google. 3 Enter main menu. 4 5 Volume+/-.
2. Basic Operation (According to the actual product) 1) In Start-up status, the system defaults to enter the radio interface. 2) Press【 】on the top of screen to enter main interface. 3) After entering into main interface, slide to the left/right for selection of the previous/ next page. 4) Car default function: Radio, Phone, Android Auto, multimedia, Settings and other functions. （Note: default setting of vehicles cannot be delete.） 5) Press the volume +/- key on panel to adjust the volume.
3. RADIO Function Operation (According to the actual product) Touch the【Radio】icon enter the radio interface. Note: Some models follow the original car radio function, for specific functions, please refer to the original car function description. Touch icon function description ① ② ---> Enter into the home page interface and then touch the other function icon to exit. / ---> Enter semi-automatic scanning for low/high frequency.
4. MEDIA Function Operation (According to the actual product) Touch the【Media】icon to enter the media player. Multimedia includes: (Bluetooth music/USB). 1) The host unit will automatically identify whether USB device is inserted or Bluetooth connected, the icon will be highlighted when identify the corresponding device, then click to enter. (Note: USB icon is always highlighted) 2) Bluetooth music the device that can not be recognized is gray and can not enter.
5. Phone Function Operation (According to the actual product) Click or press【Phone】icon on the main interface to enter Bluetooth phone operation interface. 1) Do not connect the original bluetooth device while connecting ours, Only one device is allowed to connect. 2) If it has to, disconnect our device and delete it on your mobile record before you connect the original one. Note: As the Bluetooth modules and software of cell phone with different brands, some functions may not compatible with others.
5. Phone Function Operation (According to the actual product) Bluetooth call history After successful connection, Click enter bluetooth call history, can check the call history (dialed/missed calls/incoming calls). --->Make a call --->Dialed calls --->Incoming calls; --->Clear the entered number(dialed/missed calls/incoming calls); Slide up/down to view the call history. Bluetooth phonebook After successful connection, Click enter bluetooth phonebook, you can check the phonebook on the machine.
6. Settings Function Operation (According to the actual product) Touch the【Settings】icon to enter the setup function interface. Settings function includes: General Setting / Sound Settings. SYSTEM Settings Brightness: LCD Close: Click " " to turn off the screen, then click anywhere on the screen or any button on the panel to turn on the screen. Brightness: Click "- / +" or drag the " " icon to the left and right to adjust the daylight brightness.
6. Settings Function Operation (According to the actual product) Display: Brightness/Contrast/Hue/Saturation/ Click " / " to adjust. About: Enter the factory/version number (SW version/APP version/MCU version/BT address/ GPL version). SWC: Enter the steering wheel interface, click the "Start" button, and then click one of the buttons on the screen, such as "Next" and at the same time,press the "Next" button on the steering wheel and do the same with other buttons.
7. Optional Function (According to the actual product) CarPlay: CarPlay is available when connect the phone, please see details as below. (Phone original cable is better) When the iPhone is equipped with CarPlay APP, the host unit connects to the iPhone.The CarPlay icon appears on the screen. Click the CarPlay icon to enter CARPLAY function interface,at this time the CarPlay function on the host has been synchronized to the host screen display, such as: telephone, voice.
8. Accessories (optional) (According to the actual product) Installation of Reversing Camera The standard installtion position of the water-proof built-in camera is as shown as below. Camera ※ The ordinary camera can be installed in any water-proof position needed.
