User manual

Press or turn the knob for the temperature to
start the procedure.
You can use the End function to delay the start of
the cleaning procedure.
During the Pyrolysis the oven lamp is off.
5. When the oven is at its set temperature, the
door locks. The display shows the symbol
and the bars of the heat indicator until the door
unlocks.
To stop Pyrolysis before it is completed, turn
the knob for the oven functions to the off
position.
6. When Pyrolysis is completed, the display
shows the time of day. The oven door stays
locked.
7. When the appliance is cool again, an acoustic
signal sounds and the door unlocks.
CLEANING REMINDER
To remind you that the Pyrolysis is necessary, PYR
flashes in the display for 10 seconds after each
activation and deactivation of the appliance.
The cleaning reminder goes out:
• after the end of the Pyrolysis
function.
• if you press and at the same
time while PYR flashes in the
display.
CLEANING THE OVEN DOOR
The oven door has four glass panels. You can
remove the oven door and the internal glass panels
to clean them.
The oven door can close if you try to
remove the glass panels before you
remove the oven door.
CAUTION! Do not use the appliance
without the glass panels.
1. Open the door fully and hold the two door
hinges.
2. Lift and turn the levers on the two hinges.
3. Close the oven door halfway to the first
opening position. Then pull forward and remove
the door from its seat.
4. Put the door on a soft cloth on a stable surface.
21