User manual Refrigerator FBA6317
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Operation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 4 4 4 6 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Envi
squashed or damaged power plug may overheat and cause a fire. 3. Make sure that you can come to the mains plug of the appliance. 4. Do not pull the mains cable. 5. If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire. 6. You must not operate the appliance without the lamp cover1) of interior lighting. • This appliance is heavy. Care should be taken when moving it.
Operation Switching on Insert the plug into the wall socket. Turn the Temperature regulator clockwise to a medium setting. A medium setting is generally the most suitable. Temperature regulation However, the exact setting should be chosen keeping in mind that the temperature inside the appliance depends on: • room temperature • how often the door is opened • the quantity of food stored • the location of the appliance. The temperature is automatically regulated.
The coldest area of the refrigerator compartment is at the level of the lower glass shelf. The symbol opposite shows the location of the coldest area of your refrigerator. The space directly above the glass shelf of the fruit and vegetable drawer is the coldest region of the refrigerator compartment as shown by the shelf or the sticker on the wall of your appliance.
1. You can switch on the fan by pressing the switch (1). The green light (2) comes on. 2. Adjust the Temperature regulator to the FAN position. This device allows for rapid cooling of foods and a more uniform temperature in the compartment. 2 1 Important! Switch on the fan when the ambient temperature exceeds 25°C. Removable Drawer Fruit, vegetables and bottles should be placed in the special bottom drawer provided (see the diagram).
• lean foods store better and longer than fatty ones; salt reduces the storage life of food; • water ices, if consumed immediately after removal from the freezer compartment, can possibly cause the skin to be freeze burnt; • it is advisable to show the freezing in date on each individual pack to enable you to keep tab of the storage time.
3. Leave the door open. 4. When defrosting is completed, dry the interior thoroughly and refit the plug. 5. Switch on the appliance. 6. Set the temperature regulator to obtain the maximum coldness and run the appliance for two or three hours using this setting. 7. Reload the previously removed food into the compartment. Important! Never use sharp metal tools to scrape off frost from the evaporator as you could damage it.
Problem Possible cause Solution The room temperature is too high. Decrease the room temperature. Water flows on the rear plate During the automatic defrosting process, frost defrosts on the rear of the refrigerator. plate. This is correct. Water flows into the refriger- The water outlet is clogged. ator. Clean the water outlet. Products prevent that water flows in- Make sure that products do not touch to the water collector. the rear plate. Water flows on the ground.
Technical data Dimension of the recess Height 1780 mm Width 560 mm Depth 550 mm Rising Time 20 h The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label. Installation Caution! Read the "Safety Information" carefully for your safety and correct operation of the appliance before installing the appliance.
Door reversibility On the opposite side: • Install the lower pin. • Install the door. • Tighten the spacer and tighten the upper pin. The door of the appliance opens to the right. If you want to open the door to the left, do these steps before you install the appliance: • Loosen the upper pin and remove the spacer. • Remove the upper pin and the door. Ventilation requirements The airflow behind the appliance must be sufficient. • Remove the door. • Loosen the lower pin.
13mm Ø 2,5 2 I 4mm 1 44mm I Drill the unit using a Ø 2.5 mm drill (10 mm max. penetration). Fix the square fitting to the appliance. Install the appliance in the niche. Push the appliance in the direction of the arrows (1) until the upper gap cover stops against the kitchen furniture. Make sure that the distance between the appliance and the cupboard front-edge is 44 mm. Push the appliance in the direction of the arrows (2) against the cupboard on the opposite side of the hinge.
50 mm Ha 90° 8 mm 21 mm Ha Hc 21 mm 50 mm Hb Install the part (Ha) on the Push the part (Hc) on the Open the appliance door inner side of the kitchen part (Ha). and the kitchen furniture furniture. door at an angle of 90°. Insert the small square (Hb) into guide (Ha). Put together the appliance door and the furniture door and mark the holes. Hb Place the small square on the guide again and fix it with the screws supplied.
Reversibility of the freezer door 180˚ Environmental concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment.
www.electrolux.
