User Manual

Page 9 of 12 Rev
0
AIRWAVE TECHNOLOGIES INC.
4F, No.9 Industry E. 9
th
RD., Science-Based Industrial Park, Hsinchu, Taiwan, R.O.C. TEL : [phone] Fax [phone]
©
Date :2011.1.10.
Design Kit – 5.8GHz Wideband FM Receiver Module
Doc No :
8. DC/AC Electrical characteristic:
(VCC=DC +5V, 25
°C)
RF/ DC Parameters Min. Typ. Max. Unit
Supply voltage
4.95 5 5.05 V
Supply current
190 200 210 mA
RF Input Level
-85 -10 dBm
Operating temperature
-10 - 60 °C
Operation Frequency Range
5725 5875 MHz
Channel Selection
PLL Synthesizer, 7CH (See Tabl1)
Channel Frequency
CH1： 5740 MHz, CH2： 5760 MHz
CH3
：
5780 MHz, CH4
：
5800 MHz
CH5： 5820 MHz, CH6： 5840 MHz
CH7
：
5860 MHz.
Video-Audio Modulation/Demodulation Type
FM-FM
Video
Output Signal Level 1V
P-P
, typ. (+/-0.2Volt)
Frequency Response +/-5 dB, max. 50Hz~5.5MHz
S/N Ratio (100KHz, 1V
P-P
Sine Wave) 40dB, min.
Audio
Output Frequency Range 50Hz ~ 20KHz
Output Signal Level (Modulation Signal :
1kHz Sine Wave)
2Vp-p
RSSI
RSSI output voltage (RF input -30dBm~-90dBm) 0.4~2.2V
Copyright 2011 by Airwave Technologies Inc. All Specification are subject to change without notice.