User Manual

www.fatshark.com
Model 2462 (CE certified) Cased 25mW 5G8 Transmitter Spec Doc REV B
Operation
Connect a Fat Shark camera to the camera cable to complete the downlink system.
Use your goggles to scan for the clearest channel (display should be uniform snow).
Set the transmitter channel to same frequency (ships default on channel 1) and
connect the balance lead of your 2S, 3S or 4S (7.4V - 16V) RC battery to the filtered
balance lead and you are ready to fly. The handy balance lead filters RC servo and
motor noise from your RC pack for a crisp, clear image.
Specifications
Electrical:
RF Module: NexwaveRF
Power supply 6 - 17V (2S-4S supply)
Power consumption: <100mA @12V (+camera supply)
Power out (to camera) 5V, 250mA max
Transmitting power: 25mW
Operating Frequency: 5G8 (see below frequency chart)
Channel select chart:
1 2 3 4
Ch1 5740 MHz On On On N/A
Ch2 5760 MHz Off On On N/A
Ch3 5780 MHz On Of
f
On N/
A
Ch4 5800 Mhz Off Off On N/A
Ch5 5820 MHz On On Off N/A
Ch6 5840 Mhz Off On Off N/A
Ch75860 MHz On Off Off N/A
Antennae
Antenna type: circular polarized
Mechanical
Dimensions: 40 X 26 X 14 mm
Weight: 20g
Packaging
Dimensions: 120 x 40 x 18 mm
Weight: 40g