Datasheet

www.fatshark.com
Fat Shark Specification Document
Model Number: 1607
Model Name: 4S Filtered Balance Lead TX Supply
Document Revision/Date: Rev A / 08.04.2014
Product Description:
Supplying power to your FPV transmitter and camera from your 2S, 3S or 4S RC pack is a snap with
this handy filtered adapter. This latest version now supports up to 4S packs commonly used in multi-
copters (check transmitter specification to verify your transmitter’s maximum voltage input rating prior
to connecting) without the hassle of a 2nd battery or rewiring the main discharge lead. Comes with a
2p/2p Molex cable to plug /play with your Immersion RC or Fat Shark transmitter. Integrated low pass
filter removes unwanted noise in the TX image caused by servos and speed controllers.
Specifications:
Electrical:
• Rating: Up to 2A, 18V
• Input connectors: 2p, 3p, 4p (2S, 3S, 4S) 2.54mm JST
• Output connector: 2p, 2.54mm locking Molex
Mechanical:
• Size: 24 x 26 x 8 mm
Packaging:
• Packed with typical PE plastic bag
Operational Advice:
Make sure your TX can support 4S input: check transmitter specification to verify its maximum voltage
input rating prior to connecting.
To TX
Connect Balance Lead
from 2S/3S/4S RC pack
Low Pass Filter
removes noise from
battery supply