Product Manual

A Product of Progress Mfg. Inc.

Retract the tongue jack until all of the tongue weight is resting on the hitch.

With the trailer coupled and weight distribution engaged, re-measure the front

wheel well height from the ground in exactly the same place as before in this

step. Record this new measurement on Line C of the Weight Distribution Setup

Table on page 15.

Step 7 - Weight Distribution Adjustments

WARNING

Weight distribution is only one of many things that inuence sway. e

operator is responsible for making necessary adjustments to all contribut‑

ing factors in order to minimize sway.

Good adjustment:

You have most likely achieved good weight distribution adjustment if your

measurement on Line C of the weight distribution setup table shows that front

wheel well measurement is at least halfway back to the original uncoupled

measurement, and ideally, back down to as close to the original uncoupled

measurement as possible.. See Line C on Weight Distribution Setup Table and

Figure 16 below.

Figure 16

C halfway back with WD

A uncoupled

good

adjustment

needs

See Weight Distribution

Setup Table on p. 15.

B coupled - no WD