Product Manual
16
FastwayTrailer.com
With the tow vehicle still coupled to the trailer, use the tongue jack to lift
both vehicles until you can swing the spring arms into place over the
L-brackets. See Figure 13.
If you reach the top of the jack before the spring arms will swing into
position, you can use the Snap-up Lever to lift the spring arms up and onto the
L-brackets. Use the L-pins to secure the spring arms on the L-brackets. See
Figures 14a -14b.
With the spring arms resting on the
L-bracket and the trailer and tow vehicle
in line with each other, check to make sure
that there is a minimum of 3” from the end
of the spring arms to the center of the link
plates. See Figure 15. Move and re-tighten
the link plates if necessary.
NOTE: Refer to Appendix B “Weight
Distribution Adjustments” on page 24 for
a more detailed description of factors that
inuence weight distribution setup and
adjustment.
Figure 13
Figure 14a
Figure 14b
3”
Figure 15