User Manual

26
FastwayTrailer.com
FAQ
Q:
How often do I need to adjust the angle set bolt?
A:
is bolt only needs to be tightened if you notice a gap between the
end of it and the hitch shank. It should be checked more frequently when your
hitch is new. Include it as part of your routine when preparing to tow. See Step
10 - Regular Maintenance.
Q:
Can I back up with the hitch hooked up and weight distribution
engaged?
A:
Yes, you don’t have to remove the spring arms like you would an add-on
sway bar to back up.
Q:
Do I need to lube the hitch ball? How often?
A:
Yes, use a good bearing grease. Anytime it’s looking a little dry, wipe the
old grease and grit out of the coupler socket and o of the hitch ball, then put
a good dab (about 1 teaspoon) of grease on the hitch ball before coupling up.
is will protect the hitch ball and coupler as well as eliminate some towing
noise.
Q:
Can I use an aftermarket airbag suspension kit with the e2 hitch?
A:
Yes. Just make sure you air them up to the pressure you want to tow
with before setting up the hitch for weight distribution. Filling air bags after the
hitch has been set up usually causes the weight distribution to decrease, even
though it looks like the back of the tow vehicle is not sagging.
If your tow vehicle came with a stock auto leveling system (air bags), follow
the directions in Step 1 - Getting ings Ready.