Product Manual
13
USER MANUAL
1,600 KG 12V DC A-Frame Black Jack Trailer Jack™ User Manual V2.6 ©
18. TROUBLESHOOTING
Contact Titan RV for a solution if the device does not function properly or parts are
missing. If unable to do so, have a qualied technician service the device.
Problems Possible Cause(s) Suggested Solution(s)
Motor is not
operating
Poor Ground Use the Earth cable provided to
connect from one of the three
bolt positions on the Black Jack
Mounting Plate. Ensure the Star
Washers provide has clean contact
to bare metal. Sanding back this
point can also improve this metal on
metal contact. Once this has been
created attached the other end to
your chassis rail. Pre-drill and use
the Tek Screw provided to connect
the earth cable.
No or Low voltage Check battery and electrical
connections. Power supplied must
be at least 10V DC. If the battery
is low, plug the trailer cable into
the tow vehicle, and start the tow
vehicle to provide power to the jack.
No Power from
trailer connector
Check the trailer connector has
power. Replace or repair the trailer
connectors or wiring.