Data Sheet
Product Operation
For each frequency from 902-928 MHz in 0.25, 1, 5 or 10 MHz jumps it determines the minimum
power required f or full conversation between the FASTCHECKER FC01 and the tag using the EPC C1G2
/ ISO18000-6C communication protocol.
As an example, the figure below shows the result of the analysis of 3 different tags by FASTCHECKER
FC01. The graphs show the minimum power required to access the tag (threshold) as well as the
backscattered power value of each of the measurements taken. The execution time of a tag test is
approximately 1 minute.
Technical Data
Item Technical Data Unit
Operation Volta
g
e5 V
DC
Maximum Operation Current 50 m
A
Standby Current ≤20 m
A
Operation Frequencies 902-928 MHz
Frequencies Step 0.25 ; 1 ; 5 or 10 MHz
Maximum RF Output Power 25 dBm
Maximum Irradiated Power 27 dBm
Power Step Adjustment 1 dB
Communication Protocol EPC C1G2/ISO18000-6C -
Communication Port Control USB -
Adjascent Channel Attenuation ≤-40 dB ±1CH ≤-60 dB ±2CH -
Frequency Stabilization
±10 ppm -25Ԩ～+40Ԩ ±20 ppm 40Ԩ～+60
-
Thermal Protection 70 ºC
RF module protection(Power + VSWR) 10 -
Dimensional
Dimension(Length X Width X Height)：129×80×22mm
Weight：280g
Interface