Specification

575 Broadhollow Road (Rt. 110), Farmingdale, NY 11735 Tel: [phone] Fax: [phone] Email: [e-mail] Website: www.richterrevo.com
Test Method: US code of federal regulations Part. 1500.44, Titel 16
Flammability Test on Rigid and Pliable Solids: PASS
Sample Burning Rate: inch/sec
Polyester Resin based Metalized Panel: 0.004
*A sample is considered to have passed the test if the burning rate is not more a 0.10 inch per Second.
Test method: As specied in AOAC 16th Ed. Section 973.32 & 973.82
Polyester resin-based- metallized panel / bowl
Lead and Cadmium content in earthenware quantilation by AAS: PASS
SGS Laboratory No. Extract, Volume (||) Lead, ppm (mg/L) Cadmium, ppm (mg/L)
14324 2.0 <1.0 <0.25
14324 2.0 <1.0 <0.25
14324 2.0 <1.0 <0.25
14324 2.0 <1.0 <0.25
14324 2.0 <1.0 <0.25
14324 2.0 <1.0 <0.25
Limit for FDA (any one of six) 1.0 ppm 0.25
Notes:
1. < = less then
2. mg / L = milligrams per litter
3. ppm = parts per million
AAS = ATOMIC ABSORPTION SPECTROPHOMETER
Conclusion: The client submitted samples described above comply with the leachable lead and cadmium
requirements of the American Food and Drug Administration (FDA).
Test Method: Nitric Acid digestion and analyzed by Atomic Absorption Spectrophotometer.
Test Sample: 04249 Stone/Slate on Resin 12 x 12 tile size 6x12
To determine the soluble Heavy Metal contents in accordance with the European Standard EN 71 part
3.1994 + A1:2000 – Migration of certain elements.