User Manual

FastRawViewer – user manual
Page 109 of 175 Copyright © 2014-2016, LibRaw LLC, www.libraw.com
Image Display
The settings in this group control the processing and the display of the images (except for white
balancing, as the WB settings are in a separate group).
 Contrast curve – sets the tone curve to be used when displaying the image:
o Gamma 1.8, Gamma 2.2, sRGB, L* - sets one of the standard tone curves, typically
used in image editing.
o Variable contrast – corresponds to the variable tone/contrast curve, see Adjusting
image contrast section for details.
 Boost shadows amount – controls the additional gamma adjustment while in Boost Shadows
mode, the range is 0.2 to 2.0.
 Highlights inspection – this group of settings controls the Highlight Inspection mode:
o Gamma decrease – the amount by which the Gamma for the image will be reduced.
o Decrease Exposure by – additional image darkening.
o Apply UniWB white balance – White Balance will be substituted with UniWB, thus
avoiding any possible clipping caused by White Balance.