Operation Manual

10.2. DC936-12 DC/DC Converter for 9V – 36V DC to 12V DC

With the DC/DC converter, DC936-12, it is possible to operate

electronic 12V nominal voltage devices with a 24V on board

network. Vice versa, with the 936-24,a 24V a unit can be operated

with a 12V network. The maximum power consumption of the unit

connected can be as high as 30 Watt.

By an input voltage from 9V to 36V, the output voltage will be

constant. The input and output voltages are galvanically

separated. The efficiency is between 75 and 82%, depending on

the fluctuation of load. Special filters have been integrated at

input and output, to suppress noise voltage and radiation

interference and which guarantee interference free operation of

connected devices and from the onboard network. We

recommend that you use shielded cables for input and output.

For this reason, an earth connection has been provided for at

both terminals.

Technical Information:

Dimensions: (L150 x W102 x H36) mm

Connections; terminal screws / PG 11

Input voltage: 9 to 36 volt DC

Type: DC936-12: 12 volt output voltage

Max. output current 2.5 amp.

Type: DC936-24: 24 volt output voltage

Max. output current 1.25 amp.