Operation Manual

9.5. Record Out- Tape Deck, PC etc.

The receiver has a LF output with a drive level for a tape

deck (approx. 200mVss) coming out of the REC OUT

connection on the reverse of the unit. It is possible here to

connect an external tape deck or amplifier.

Let the necessary connections be done by an expert. The

input of incorrect voltages, or if the signal level is too high,

could lead to the destruction of the FMD55.

9.6. Connecting External Loudspeaker

An external speaker can be connected to the three-point

connection. In this case remove the factory produced

bridge and connect as follows:

a) internal speaker only