Operation Manual

8.3.3. Controlling The LCD Display Lighting

The back-lit display normally switches on when the timer mode

is automatically activated. This can, in some cases, be

distracting at night. For this reason we have installed a

function, which can be switched on or off by the user.

x Press <SETUP> to enter menu SETUP 1

x Press key No. <2> to enter <SETUP 2> menu

x Press key No. <6> to enter <TIMER> menu

x Press <DOWN> twice

to enter <LIGHT-ON> menu

You can now choose whether to have the display back lit by

pressing <YES> or not by pressing <NO>

x Press <EXIT> three times to return to the basic standby mode.

You can however switch the lighting on during a timer function

by pressing the <DISPLAY> key

8.4. Printing Out System Data

The following system data can be printed out:

x Navigation log ON/OFF and by ON the trigger parameters

x Automatic return to standby mode (timeout) ON/OFF.

x Display back-lighting in timer mode ON/OFF.

x Memory storage 01 to 30 (receiver and decoder settings)

x Timer function ON/OFF

x Timer programmes 1 to 9

x Footnote:- Name of vessel, owner, and software version.

To activate the print out:

x Press <SETUP> to enter the SETUP 1 menu

x Press key No. <2> to enter SETUP 2 menu

x Press key No. <7> to enter <INFO>.