Operation Manual

To control the continual amount of data, two parameters
can be selected to define the information according to
your personal wish.
Parameter 1: time from 1 to 99 minutes
You can select, in which time intervals the
position should be stored, even when there
has been no movement (e.g. at anchor, in
berth).
If <00> is entered as time parameter, there will
be
no time-defined entry
. This saves data
records being stored and printed out, when
the vessel is stationary for a longer period of
time.
Parameter 2 positional movement in minutes (1 to 9n.m.)
You can also select, independent from the time interval, a
distance after which the position of your vessel should be
documented. For easy calculation, the values north/south
and east/west are separated.
To activate the log:
press <SET UP> button
press no. 2 to enter GPS LOG
to activate the log function press <YES>. (press <NO> to
switch off)
use cursor <DOWN> to spring to position TIME
select the TIME interval with <YES>/<NO> keys
use cursor <DOWN> to spring to position WAY
select the WAY interval with <YES>/<NO> keys
press <EXIT> 4 times to return to stand-by
www.Busse-Yachtshop.de email: [e-mail]