Operation Manual

4.3. Reading Stored Messages

Stored messages can be read out at discretion. However

NAVTEX messages are automatically deleted after 72

hours. The memory store has a total capacity of over 16000

characters of which approx. 4500 are reserved for NAVTEX

and the rest for MORSE, RTTY and SITOR. When the store is

full, the oldest message will be deleted. However this

applies to the two different stores separately e.g. a new

RTTY message will not replace a NAVTEX message and

vice versa. Each message is filed under date and time as:

DD MM HH MM (day, month, hour and minute)

x Press the <READ> key call up READ MEMORY menu

x Select type of message to be read with keys <1> to

<4> or <UP> and<DOWN>

The display will now show an overall view of the stored

messages.

By using the cursor keys:

Select the message required.

x Press the <DISPLAY> key and the selected message will

appear on the LCD

x With the use of the keys <UP> and <DOWN> you can turn

the pages. Either by pressing <EXIT> or on reaching the

end of the message you can leave the <READ> mode.

x To return to the basic standby mode, press <EXIT> once

more.

4.4. Printing Out Stored Messages

Stored messages can be printed out as often as required.

The selection of the message is carried out as by reading out

above.

x Press the <READ> key call up READ MEMORY menu

x Select type of message to be read with keys <1> to <4> or