Operation Manual

Unless you press <ENTER> it is possible to change the

values until they are correct. Having controlled that all

data is correct then <ENTER>. By pressing <ENTER>

once more you come to a new insertion line and can

programme additional times. It is also possible to

delete insertions as follows:

x Press key

x Select by means of the numerals <1> to <9> the line to be

deleted

<NO

CLEAR

x Press <ENTER> to delete.

By pressing the <EXIT> key twice, the unit returns to the

basic standby mode.

One timer slot has a maximum of 60 minutes, however

it is possible to commence a new slot with the same

ON time as the previous OFF time. Should the

programmed times overlap, the new time is dominant.

When interrupting by manual operation e.g. calling up

a new frequency, the unit returns to the standby

mode. Should this not be wished, the timer must be

turned off completely via the menu.

4.2. Interrupting and Resetting Timer

By pressing <STDBY> or <F1/2182> you can interrupt an

incoming message. At the end of each OFF time, the

unit will return to the standby mode automatically. To

continue in the current incoming message, switch off

for 3-5 seconds.