Operation Manual

The FMD25 navigation log function will work even when other
functions e.g. reception, decoding are in process. Only when an
incoming NAVTEX message or a longer decoding is taking place,
will the position log be interrupted, however it will commence
immediately at the end of the message. At any given time, 50
position data will be stored. After every 50
th
value, the storage will
be printed out automatically. This does not take place during
message decoding or when the FMD25 is being operated
manually, but as soon as the FMD25 returns to the stand-by mode.
However, you can print out the actual stored data at any time. To
do this:
x call up the GPS LOG
x press <PRINT>
When the print out has ended, the display will ask:
<DELETE ALL?>
Press <YES> to delete all position data in the storage or press <NO>
to save the data. On receipt of new data, the oldest will be
automatically deleted.
Using the above function, it is manually possible to print out the log
daily. An automatic deletion after print out was deliberately
waived to make it possible to repeat the print out, should there be
a printer error.
page 7-4 FMD25 10/99