Operation Manual

FMD 25 – 10/99
ATTENTION
IMPORTANT INFORMATION
The FMD25 has two M5 threaded holes on either side
for the supplied thumb screws, so that it can be fitted
to the universal mounting bracket. The length of the
thumb screws has been so determined, that, together
with the bracket and the lock washers, they can only
penetrate approx. 5mm into the thread.
Should you use alternative fitting methods or screws,
please make sure that they do not penetrate the
thread by more than 5mm.
By using longer screws, the integrated electronic
could be damaged !!