Dimensions Guide

ESR-1078
|
Most Widely Accepted and Trusted Page 4 of 8
TABLE 1C—FASTENER SPECIFICATIONS: LEDGERLOK AND LOGHOG FASTENERS
LEDGERLOK
®
/
LOGHOG
®
FASTENER
DESIGNATION
HEAD
MARKING
OVERALL
LENGTH
1
(inches)
LENGTH OF
THREAD
2
(inches)
UNTHREADED
SHANK
DIAMETER
(inch)
MINOR THREAD
(ROOT)
DIAMETER
(inch)
BENDING
YIELD
3
(F
yb
, psi)
ALLOWABLE
FASTENER STRENGTH
Tensile
(lbf)
Shear
4
(lbf)
LL358
F3.6
3
5
/
8
2
0.228
0.202
200,700
1,833
1,235
LL005
F5.0
5
3
LHOG009
F9.0
9
3
183,200
1,335
890
LHOG011
F11.0
11
3
LHOG013
F13.0
13
3
LHOG015
F15.0
15
3
For SI: 1 inch = 25.4 mm, 1 lbf = 4.4 N, 1 psi = 6.895 kPa.
1
For purposes of measuring overall fastener length, fasteners must be measured from the underside of head to bottom of tip.
2
Length of thread includes tip. See detailed illustration.
3
Bending yield strength determined per methods specified in ASTM F1575 and based on the minor thread diameter.
4
Allowable shear strength values apply only to shearing in the unthreaded shank portion of the fastener.
TABLE 1D—FASTENER SPECIFICATIONS: TRUSSLOK FASTENERS
TRUSSLOK
®
FASTENER
DESIGNATION
HEAD
MARKING
OVERALL
LENGTH
1
(inches)
LENGTH OF
THREAD
2
(inches)
UNTHREADED
SHANK
DIAMETER
(inch)
MINOR THREAD
(ROOT)
DIAMETER
(inch)
BENDING
YIELD
3
(F
yb
, psi)
ALLOWABLE
FASTENER STRENGTH
Tensile
(lbf)
Shear
4
(lbf)
EWS338
F3.3
3
3
/
8
1
1
/
2
0.228
0.215
218,400
1,833
1,235
EWS005
F5.0
5
EWS670
F6.7
6
7
/
10
For SI: 1 inch = 25.4 mm, 1 lbf = 4.4 N, 1 psi = 6.895 kPa.
1
For purposes of measuring overall fastener length, fasteners must be measured from the underside of head to bottom of tip.
2
Length of thread includes tip. See detailed illustration.
3
Bending yield strength determined per methods specified in ASTM F1575 and based on the minor thread diameter.
4
Allowable shear strength values apply only to shearing in the unthreaded shank portion of the fastener.