User's Manual

Rev. 6/21/2022 Page 7 of 19
Repeater
The Repeater is used when it is necessary to increase the range of the BLE transmitters. BLE
messages are received by the BLE Module. The Repeater then relays the message delivered
to the Controller using LoRa communications.
Indicator Lights
The following sections define the indicator lights located on each device.
For the controller, repeater, and RFID repeater a blink of all green LEDs in a pattern indicates
that the device is being updated.
Controller
LED
Color
State
BLE
Green
 Solid: At least one IR Bin is being actively monitored
 Off: No IR Bins are being actively monitored
LoRa
Green
 Solid: At least one Repeater or RFID Reader is being actively
monitored.
 Off: No Repeater or RFID Reader is being monitored.
Internet
Red
 Solid: There is no network connection to the controller via Ethernet
or Cellular radio.
Yellow
 Solid: Ethernet port has a local network connection, but there is no
connection to the Internet.
Green
 Solid: Either the Ethernet port or an installed cellular radio adapter
has a good internet connection.
Repeater
LED
Color
State
BLE
Green
 Solid: At least one IR Bin is being actively monitored
 Off: No IR Bins are being actively monitored
LoRa
Green
 Solid: LorA Link to a Controller has been established.
 Off: No LoRa link to a Controller has been established.
Power
Green
 Solid: Powered on but locked up
 Heartbeat: Powered on and running
 Off: No power