User's Manual

Rev. 6/21/2022 Page 11 of 19
Controller
1. Configure the device:
a. If the site uses DHCP Ethernet, then no special network setup is required.
b. If the site requires use of a static IP address, contact Fastenal
support to configure the network settings.
2. Plug in the power cable to a standard wall power outlet.
3. Ensure that the controller has a network connection and is plugged in via
the network connection LED indicator.
4. Ensure that no Reader or Repeater is more than 500 feet (152.4 meters) from
the Controller and that the LEDs are showing that all devices are in a connected
state.
Technical Specifications [Controller and Reader]
Controller
Regulatory Numbers – Basic
Controller
FCC ID: 2APK7-922194626V10
IC ID: 23979-922194626V10
Regulatory Numbers – Controller
with cellular data interface
FCC ID: 2APK7-922194622V10
IC ID: 23979-922194622V10
Dimensions
5.556” W x 4.862” L x 2.0” H
(14.11 cm W x 12.35 cm L x 5.08 cm H)
Weight
0.71 lbs. (0.322 kg)
Power
5.0 VDC +/-10%, 1.2A max input
Operating Temperature
60.8° to 89.6° F (16° to 32° C)
Operating Humidity
20% to 80%
External Ports & Connections
Ethernet, Power
Supported Protocols & Regulatory
Identification Numbers
LoRa: 903-914.2 MHz (12500 bps max)
FCC ID: T9JRN2903
IC ID: 6514A-RN2903
BLE:
FCC ID:
XPYBMD360
IC ID: 8595A-BMD360
Supported Antennas
 LoRa: Flat Patch RF Antenna (Yageo
ANTX100P001BWPEN3)
 BLE: Integrated trace antenna in BLE module
 4G LTE (with optional cellular module installed):
Taoglas, Ltd. TG.30.8113