Technical Specifications

ManualsBrandsFasten Master ManualsFasteners & ConnectorsFastenMaster TimberLOK Heavy Duty Wood Screw 2-1/2" 50pc

FM06062-40M-AML

HEAD STYLE

COUNTERSINKS

ITSELF DURING

INSTALLATION.

MADE OF HEAT

TREATED STEEL FOR

DRAMATICALLY

INCREASED

STRENGTH AND

DRIVABILITY.

ULTRA COATED FOR

UNMATCHED

CORROSION

RESISTANCE.

ACQ APPROVED.

AGRESSIVE THREAD

FOR ULTIMATE

PULL-DOWN POWER.

INSTALLATION PROCEDURE

PRODUCT FEATURES

The FastenMaster TimberLok should be installed using a high torque, 1/2" variable

speed drill (at least 14.4V if cordless). Choose the proper length so that threads fully

engage the second piece.

* SCL=Structural Composite Lumber (LVL,PSL and LSL)

** Wood species identiﬁed typically have average speciﬁc gravity similar to the values

shown on this table.

All design values based on 1

/2" side member thickness and penetration into main

member as follows; TimberLok 2", Nails 10x diameter, Lags 8x diameter. Design values

may be subject to adjustment factors (section 10.3 in NDS) based on conditions existing

during installation as well as those expected during service life.

The lag screw and nail design values included in these tables are compiled directly from

the 2001 National Design Speciﬁcation for Wood Construction (2001 NDS).

TimberLok Comparative Data

The statement

Faster, Easier, Stronger Than 3/8" Lag Screws

relates to the comparison of

design shear values of TimberLoks and 3/8" lag screws.

The Professional Engineer (PE) is responsible for designing all connections, which include

the number and location of all fasteners to meet the national and local code

requirements. All minimum end, edge and spacing distances of the TimberLok should

follow minimums set forth in ICC ESR-1078. (see www.fastenmaster.com) This report

should be reviewed thoroughly when designing connections.

Note: Photographs on this package showing TimberLok usage should not be used as a

reference for fastening patterns.

For complete design values and engineering data, available through ICC-ES,

see report ESR-1078 at www.icc-es.org.

For technical assistance or backup information, please contact FastenMaster Technical

Support at 1-800-518-3569.

Speciﬁc FastenMaster

Nails Lags

Gravity** TimberLok 10D 16D 20D 1/4" 3/8"

Red Oak 0.67 299 154 184 222 140 160

Southern Pine 0.55 257 128 154 185 120 140

Doug. Fir-L, SCL* 0.50 240 118 141 170 110 130

Doug. Fir-S 0.46 226 109 131 157 100 120

Hem. Fir 0.43 215 102 122 147 100 120

E. Spruce, W. Cedar 0.36 189 87 104 126 90 100

Lateral Design Values (in pounds per Fastener) for single shear connections loaded perpendicular to grain

Wood

OMG, INC., 153 BOWLES ROAD, AGAWAM, MA 01001

800

518-3569 WWW.FASTENMASTER.COM

Part Number Screw Length Quantity per Pack

FMTLOK04-10 4" 10

FMTLOK06-10 6" 10

FMTLOK08-10 8" 10

FMTLOK10-10 10" 10

FMTLOK212-50 2

2"50

FMTLOK04-50 4" 50

FMTLOK06-50 6" 50

FMTLOK08-50 8" 50

FMTLOK10-50 10" 50

FMTLOK212-500 2

2" 500

FMTLOK04-250 4" 250

FMTLOK06-250 6" 250

FMTLOK08-250 8" 250

FMTLOK10-250 10" 250