Datasheet

FASTECH AG
Klettverschluss-Systeme
Zurlindenstrasse 29
CH-4133 Pratteln
Switzerland
Tel. [phone]
Fax [phone]
E-Mail [e-mail]
Web www.fastech.ch
FASTECH
®
Ihr Klettbandspezialist. Entwicklung, Herstellung und Vertrieb von innovativen Klettverschluss-Systemen
FASTECH
®
your self-gripping fasteners specialist. Copyrights © by FASTECH AG. All rights reserved.
Y2016 www.fastech.com Page 1 of 1
Technical Data
S
heet
PS-A69
Hotmelt Adhesive
Pressure Sensitive PS-A69
Base material: Rubber based Adhesive
Color: Very light transparent yellow
Usage: To be used on the clean and smooth surfaces
Shelf Life: one year
Adhesive Properties:
Peeling Strength at 180 degree:
Initial Tack: 31.4 PIW
Complete Cured: 41.5 PIW
Holding Power: 124 hours
Soften Point: 93 degree C
Tests are performed by attaching the specimens to a steel substrate for 24 hours. Holding power is
a measurement of time on the failing when attached a 1”*1” specimen to a steel substrate with a
weight of 1kg.
Resistance Properties
Oxidation: moderate (Anti-Oxidation is added)
Plastifying, oils: poor
High relative humidity: moderate
Solvent: poor
High temperature: 60 degree C
Low temperature: -5~0 degree C
U.V radiation: poor
Temperature Range: -5~60 degree C
General Information:
This adhesive is recommended to be used on the substrate like, PP and PE plastic material,
injected material and steel plates. To use on PVC material and EVA foam is not recommended.
All statements contained herein are for information only and not contractual. For orders and specific information, please contact FASTECH AG.
The information included in this Technical Sheet is based on reliable tests and trials. The average values correspond to the averages to the previous year to
the edition of this document . Given the diversity of uses of our products we advice our customers to assure themselves that the product meets the
requirements of their application. The responsibility for the application and use of the product remains with the customer.