User's Manual

Liberator-V1000 User Manual Rev 04v05
Page 68 of 85 FBN Doc #: FBN-0125_04v05
Figure 82 - Copy the Loaded Firmware to Inactive Bank
IMPORTANT : Note that after switching banks and rebooting, the rollback function will require confirmation
to be made. Upon the next reboot and login the confirm / rollback option will appear.
If the bank change is not confirmed within the rollback expiry time after reboot (default 3 minutes), then the
rollback function will rollback the change made to the Firmware bank which will cause the unit to reboot
back to the original bank – this is a failsafe mechanism to protect the radio link in case the link does not re-
establish after the Firmware bank change has been made.
Figure 83 - Changes to Firmware Banks must be confirmed after reboot