User's Manual

Liberator-V1000 User Manual Rev 04v05
Page 66 of 85 FBN Doc #: FBN-0125_04v05
performing a firmware upload, first be sure that a stable firmware version is in the ACTIVE memory bank.
Click on the “Change” button in the “Switch bank” section to swap the active and inactive banks if necessary.
The “Copy” button in the “Duplicate bank” section allows a firmware version to be copied into both banks if
desired.
Firmware upload uses HTTP, simply choose the filename and press “Upload”. There is also the option to
upload a firmware file using a TFTP server: in this case it is necessary to set-up a TFTP server, and then select
the server IP address and filename.
Figure 79 - Firmware Upgrade page
Once initiated the firmware upgrade process should not be interrupted. Interrupting the process could result
in a corrupt firmware image and a non-operational radio terminal.