User's Manual

Liberator-V1000 User Manual Rev 04v05
Page 62 of 85 FBN Doc #: FBN-0125_04v05
This page allows the user to change the Site Name, Link Name, Terminal Name and also enable / disable the
rollback function and the rollback timeout period. Always press “Apply” so that changes will take effect. The
SNMP Service box must also be ticked on this page, in order to allow use of SNMP.
Figure 73 - Setting the Rollback function
Figure 74 - Icon Displayed When Rollback Is Enabled and a Critical
Change Is Made on the GUI, showing timer countdown
5.4.13 Administration - Alarms
The unit has a number of default alarms which cannot be removed from the display (but can be disabled), and
in addition the user can specify extra alarms: these can be added on the “Alarm Management” page, but they
only take effect after pressing the “Apply” button. For each alarm, the type and severity can be changed, and
there is also an option for sending a trap to SNMP and/or to Syslog. The “Alarm Management” page allows the
user to create and configure alarms, see below.