User's Manual

Liberator-V1000 User Manual Rev 04v05
Page 29 of 85 FBN Doc #: FBN-0125_04v05
5.2 Home Page
Figure 31 - Welcome Page
After a successful login the Home Page is displayed. The first box on this page shows the Link Name, Terminal
Name, Tx and Rx modulation modes (QPSK or 8PSK), Air Date Rate (either 500Mbps, 700Mbps or 1000
Mbps), and regulatory region (either “FCC” or “NON-FCC”). The second box gives a snapshot of current
System Status, and also Alarms. The Status bars are highlighted in GREEN if the Radio Interface, Radio Link
and Ethernet Interface are up, otherwise they will be YELLOW for acquiring a radio link, or RED for down.
The alarm bars are highlighted in GREEN, YELLOW or RED depending on the status of each alarm.
Following industry standard practice, the menu on the left side of the page has 3 categories:
1. Operation
2. Administration
3. Maintenance
Users having different access privileges may be restricted to only access the Operation, or Operation and
Administration pages, whilst the administrator will have full access to all pages. The default setting is a single
user with full access privileges (Maintenance-Level privileges).