Installation Guide
Table Of Contents
- Purpose & Applicability of This Guide
- Special Considerations and Safety Warnings
- Table of Contents
- 1. Introducing Intelligent Backhaul Radio (“IBR”)
- 2. Getting Started
- 3. Communicating with IBR
- 4. Preconfiguring IBRs
- 4.1.1 Web Graphical User Interface (GUI) – User names and passwords for the GUI are managed independently from CLI user names and passwords. For additional information, see the GUI section of the CLI Guide.
- 5. Installing IBR
- 5.3.1 Mounting Location - Choosing the best possible mounting location for IBR is important for safety, security, and link performance.
- 5.3.2 Fastback Networks’ Articulating Bracket - Fastback Networks offers an articulating mount that can be mounted on walls or masts and adjusted up to + 45 degrees in elevation and azimuth in 15 degree increments. The figure below shows the mountin...
- 6. Features & Functionality
- 7. Field Test Procedure
- Federal Communications Commission (FCC) Compliance Statement

IBR Installation Guide
Page 2 of 21 Doc # 770-00033.0
Jan. 22, 2016
Purpose & Applicability of This Guide
This Guide provides detailed information related to installing, operating, and trouble-shooting
Fastback Network’s Intelligent Backhaul Radio (“IBR”).
This Guide provides information that is specifically applicable to the following IBR models:
A. Model Number: IBR-1300-NA
Low Frequency Operating Band (Transmit & Receive): 5150 – 5350 MHz
High Frequency Operating Band (Transmit & Receive): 5470 – 5850 MHz
Transmit Power (Maximum): 42 dBm EIRP
Powered by a PoE
+
source
The features contained in IBR software release 1.6.8
B. Model Number: IBR-1301-NA
Low Frequency Operating Band (Transmit & Receive): 5150 – 5350 MHz
High Frequency Operating Band (Transmit & Receive): 5470 – 5850 MHz
Transmit Power (Maximum): 42 dBm EIRP
Powered by a 90-240 volt/60 Hz AC source
The features contained in IBR software release 1.6.8
Notes: 1) In a link, one radio will transmit in the low band and the other will transmit in the high band.
2) Patent information can be found at: www.fastbacknetworks.com/patents