Installation Guide

IBR Installation Guide
Page 7 of 32 Doc # 770-00001-3
Aug. 30, 2013
1.7 Physical & Environmental Features
IBR:
o Is passively cooled and can operate continuously at full power and duty cycle under
maximum solar load at ambient temperatures from -40
o
C to +60
o
C.
o Can be stored safely at temperatures in the range from -55
o
C to +85
o
C.
o Experiences a wind load of less than 300N when exposed to a wind speed of 265
km/hr.
o Has an IP66
8
environmental rating.
IBR weighs approximately 4 kg and has the approximate dimensions shown in the
illustration.
2. Getting Started
2.1 Physical Inspection
Prior to opening the shipping crate, inspect it visually for evidence that it has been opened or
mishandled. After opening the crate, carefully inspect the contents for completeness or
evidence of damage or tampering.
In the event the shipping crate is damaged or the contents are damaged or incomplete, notify
Fastback Networks by telephone, fax, or email. The shipping crate, dividers, and packing
materials should be retained for use in the event that equipment must be returned to
Fastback Networks.
After removing IBR from its packing crate, record the serial number and model number
(IBR58 or IBR53), both of which will be needed in case it is necessary to seek assistance from
Fastback Network’s Customer Support Group.
DO NOT BREAK THE TAMPER SEALS ON HARDWARE. DOING SO WILL VOID THE
WARRANTY AND MIGHT CREATE A SAFETY HAZARD AND/OR CAUSE THE EQUIPMENT TO
BE OUT OF COMPLIANCE WITH FCC REGULATIONS.
8
Ingress Protection Rating