Installation Guide

IBR Installation Guide
Page 31 of 32 Doc # 770-00001-3
Aug. 30, 2013
The installer can attach a rope or hook to one of the holes on the side of the mounting bracket in
order to hang IBR on a utility belt until it is time to attach it to the bracket. To aid in hanging IBR,
the plate on IBR can be hooked onto the mating wall/pole plate while the two M6x10 mounting
bolts are being tightened. An Allen wrench is needed to tighten the bolts.
A 2. Articulating Mount
Fastback Networks offers an articulating mount that be mounted on walls or masts and which
can be adjusted up to + 45 degrees in elevation and azimuth in 15 degree increments. Like the
Wall/Pole Mount, the Articulating Mount has a plate that attaches to IBR and a part that attaches
to the wall or mast. An articulating knuckle provides the freedom of movement.
The images below show the Articulating Mount and its components from several angles.
The images below show the Articulating Mount attached to IBR.