Owner manual

p5
© Fast & FLuid Management, TmHC manual
Step 2 - Remove transport protection
>
>
Unlock the front door, a
triangular key is supplied
with the machine.
Pull out the roll of foam.
Close the top lid first, then
close (and lock) the door.
Step 3 - Hook up TMHC to power outlet
>
>
Connect the power cable to a
wall socket.
Switch on the TMHC.
After the board initialisation
(appr 10 seconds), the screen
will show your logo.
Attention! Please do not switch on the machine before removing the
transport protection (roll of packing foam) as explained in step 2