Manual

28
Troubleshooting HA450 / HA650 V. 1.0
5.3 Troubleshooting guide
Problem Possible cause Possible solution
Main power supply is
present but the machine
does not work.
Emergency stop switch is active.
Reset the emergency stop switch. When
the problem persists, contact service.
See § 5.1.
A fuse is broken. Contact service. See § 5.1.
Display shows E01 Machine not initialized.
Restart machine. When the problem
persists, contact service. See § 5.1.
Display shows E02 Front door opened.
Close front door. When the problem
persists, contact service. See § 5.1.
Display shows E43
Pump blocked or motor / cable or
sensor faillure.
Restart machine. When the problem
persists, contact service. See § 5.1.
Display shows E44
Pump (motor / cable) or sensor
faillure.
Restart machine. When the problem
persists, contact service. See § 5.1.
Display shows E49 Can missing.
Place can. When the problem persists,
contact service. See § 5.1.
Display shows E63 Switch plate activated.
Deactivate Switch plate. When the
problem persists, contact service. See
§ 5.1.
Display shows E72 Top cover opened.
Close top cover. When the problem
persists, contact service. See § 5.1.
All others E - errors
Restart machine. When the problem
persists, contact service. See § 5.1.