Owner manual

p14

Maintenance

A - Daily maintenance

Clean the nozzle closure, refill canisters and run morning program

Replace the pad. Refill the

cup with water or cleaning

fluid until the pad is soaked.

Fill canisters if level is low

and update levels in software.

Stir colorant beforehand.

Start software morning

program to purge valves and

clean nozzles. Check your

software manual for details.

Use only cleaning fluids recommended by your paint supplier. Wrong

materials can result in nozzle blockage and reduced accuracy.

B - Weekly maintenance

Remove spilt paint & colorant and refill canisters

Clean can table and outside

parts with diluted detergent.

Clean outside parts with

diluted detergent.

Check canister content and

refill if necessary.