Owner manual

p11
© Fast & Fluid Management, AT550
Step 3 - Fill the nozzle closure.
>
>
Lift the switch plate and
move it towards the machine.
Lower the switch plate under
the dispense head.
Use the appropriate
command from the dispenser
software to open the nozzle
closure. Remove the cup
holder.
Moisturise the cup with water
or cleaning fluid until the pad
is soaked.
Replace the cup holder in its
original position. Replace the
switch plate.
Use only cleaning fluids recommended by your paint supplier.
Wrong materials can result in nozzle blockage and reduced accuracy.