Brochure

BOLT CIRCLE - 5.2"
A
44
Fig. A D3771, D3772,
D3758, D3760
Fig. B D3775, D3774,
D3752, D3755
PSC • 50 Hz • OPEN AND TOTALLY ENCLOSED VENTILATION
AIR-OVER
• 230 VAC models
• All angle mount bear-
ings. Use rainshield
when necessary
• Sleeve bearings
• Thermally protected
• UL recognized
• CSA certified
*
Uses 10M 370V capacitor
+Includes dust seal
Note: Motors on this
page have RPM ratings
based on 50 Hz power. 60
Hz power will increase
RPM approximately 20%.
H.P. Volts Amps Rot. RPM Model
Fig.
"A" Dim. Shaft Dim.
Weight
Inch/MM Inches/MM
Lbs./Kilos
1/6-1/8-1/10 230 .8-.6-.5 D.S. 1350 D3775 B 3.5/89
7.75 x .5 x 7.75
11/5.0
197 x 12.7 x 197
1/4-1/5-1/6 230 1.5-1.1-.8 D.S. 1350 D3774+ B 4.0/102
7.5 x .5 x 7.5
14/6.4
191 x 12.7 x 191
1/3-1/4-1/5 230 2.1-1.5-1.1 D.S. 1350 D3771 A 4.5/114
7.25 x .5 x 7.25
15/6.8
184 x 12.7 x 184
1/2-1/3-1/4 230 3.0-1.9-1.3 D.S. 1350 D3772
*
A 4.8/122
7.0 x .5 x 7.0
17/7.7
178 x 12.7 x 178
1/6-1/8-1/10 230 1.2-.8-.6 D.S. 900 D3752 B 4.0/102
7.5 x .5 x 7.5
13/5.9
191 x 12.7 x 191
1/4-1/5-1/6 230 2.0-1.4-1.0 D.S. 900 D3755+ B 4.5/114
7.25 x .5 x 7.25
16/7.3
184 x 12.7 x 184
1/3-1/4-1/5 230 2.6-1.7-1.3 D.S. 900 D3758 A 5.3/135
7.0 x .5 x 6.75
20/9.1
178 x 12.7 x 178
1/2-1/3-1/4 230 4.2-2.2-1.5 D.S. 900
D3760* A 5.5/140
7.0 x .5 x 7.0
22/9.0
178 x 12.7 x 178
5.6" DIAMETER
50HZ Export Motors
BOLT CIRCLE = 5.2"
Products on this page are
NOT SUITABLE for unattended
equipment unless indicated by
symbol. See inside back cover for
additional information.