Brochure
15
Fig. D D469
Fig. A D429, D437
Fig. C D475, D498
Fig. B D470, D471, D472,
D473, D477
3.3" DIAMETER
Refrigeration Fan Motors
• 115, 208-230 and 460
VAC models
• Thermally protected
• 3.9" Diameter
• Extended hubs with
rubber rings for base
mount
• UL recognized
* See Tecumseh OEM section (page 68) for cross references
† Do not have extended hubs or rubber rings for base mount
NOTE: Rotation is determined by looking at shaft end. Shaft length is measured from
motor face
.
• Mounting bracket
designed to match the
original motor (four
8-36 drilled and
tapped holes).
• Mounting hardware
included with all
models.
• All motor lengths were
designed to match
replacing unit.
• All motors have 22"
leads with
4
/64
" thick
insulation
UNIT BEARING REPLACEMENT
IMPORTANT NOTE: These motors often replace unit bearing motors whose rotation is
described opposite shaft end. This is different from Fasco standard, which is determined by
looking at shaft end.
Watts Volts Amps Rot. Model Fig.
"C"
Cross
Dim. Reference
SHADED POLE • 1550 RPM • HUBLESS FAN TYPE
9 115 .6 C.C.W. D429 A 3 GE 5411
16 115 1.1 C.C.W. D437 A3
7
/
32
GE 5811
• Rotation is as viewing
motor shaft end.
• Three studs all opposite
shaft end are 8-32 on
a standard 2.84"bolt
circle, 120° apart.
SHADED POLE • OPEN VENTILATION • SELF COOLED
H.P. Volts Amps RPM Rot. Model
"A" Shaft Cross
Fig.
Dim. Dim.
Reference
1/35 208-230 .75 1550 C.C.W. D477 B4
1
/4
5
/16 x 1
5
/8 GE 1432
1/20 208/230 1.1 1550 C.C.W. D471 B4
1
/4
5
/16 x 2
1
/2 GE 1332
1/20 208/230 .94 1550 C.W. D470 B4
1
/4
5
/16 x 2
5
/8 GE 1342
1/20 115 1.9 1550 C.W. D472 B4
1
/4
5
/16 x 2
5
/8 GE 1341
1/20 115 2.0 1550 C.C.W. D473 B4
1
/4
5
/16 x 2
5
/8 GE 1331
1/15 460 .6 1550 C.C.W. D475*† C4
1
/2
5
/16 x 2
1
/2 *
1/15 460 .5 1550 C.W. D498
†
C4
1
/2
5
/16 x 2
1
/2 —
1/12 208/230 1.3 1550 C.C.W. D469 D4
1
/3
5
/16 x 2
1
/8 GE 1232
• Interchangeable with
G.E. 11 Frame refriger-
ation motors
• 1/2" studs for mounting
Products on this page are
NOT SUITABLE for unattended
equipment unless indicated by
symbol. See inside back cover for
additional information.
See pages 48 through
71 for OEM direct
replacement models.
A
BOLT CIRCLE = 2.85"