Use and Care Manual

What is Edge J-trim and do I need to use it?
Edge J-Trim is a trim piece that is available to use on the cut or exposed edges of your backsplash. The trim is
not required to be used with the backsplash panels, but does give the backsplash a nice, finished look. The
trim pieces are available in the same colors as the backsplash panels. See our Fasade Backsplash Trim
Installation Guide for more information.
What is Inside Corner Trim, and do I have to use it?
Inside Corner Trim is a trim piece that is available to use on an inside corner of your backsplash. The trim is not
required to be used, but does give the backsplash a nice, finished look. The trim pieces are available in the
same colors as the backsplash panels. See our Fasade Backsplash Trim Installation Guide for more information.
Can the backsplash panels be cleaned?
Once you have your backsplash installed, the panels can be cleaned with soap and water only. Any harsh
abrasives will damage the finish on the tiles.
Can I put up backsplash panels behind my stove?
Even though the backsplash panels are fire-retardant, they can be deformed by excessive heat (over 140
degrees Fahrenheit). The panels can be installed behind a stove if the stove has a control panel. Be sure to
keep stovetop burners, toaster ovens, cooking ranges, etc., 2-3 inches away from the panel's surface.
What tools will I need to install Fasade backsplash panels?
To install your backsplash panels, you will need the following:
Tape Measure
Tin Snips or Scissors
Caulking gun or 1/4″-notched trowel
Utility Knife
Steel Straight Edge
Adhesive - Tube adhesive or tape adhesive