Specification

Acoustic Ceiling Products (ACP) – Fasäde Thermoplastic Panels Section 09 51 01
May 21, 2014 PVC PANELS
Digicon Information Inc. Page 3
Toll Free 800-434-3751; e-mail to: support@acpideas.com; Web site:
www.acpideas.com.
2. Substitutions: [Refer to Section 01 62 00.] [Not permitted.]
B. Material:
1. Material: Virgin grade polyvinyl chloride (PVC), 0.76 to 0.81 mm (0.030 to
0.032 inches) thick.
2. Laminated Components: ABS (acrylonitrile butadiene styrene terpolymer) plastic,
laminated with hot stamping foil.
C. Finish:
Select the following texture and color. Alternatively, these sub-paragraphs may be deleted and the ACP
color code and description specified (which identifies both the texture and color). If a variety of finishes
will be used on this project, use a schedule in Part 3 to identify them.
1. Texture: [Flat] [Traditional 1] [Traditional 2] [Traditional 3] [Traditional 4]
[Traditional 5] [Traditional 6] [Art Deco] [Rosette] [Coffer] [Square] [Dome]
[Quattro] [Rib] [Diamond Plate] [Quilted] [Hammered] [1/4 Square Punch] [9/32
Radius Punch] [miniquattro] pattern. [As scheduled.]
2. Color: [White, paintable.] [Polished Copper.] [Brass.] [Chrome.] [Brushed
Aluminum.] [Argent Silver.] [Copper.] [Copper Fantasy.] [Verdigris.] [Bermuda
Bronze.] [Moonstone Copper Cracked Copper.] [Muted Gold.] [Cross Hatch
Silver.] [Argent Gold.] [Polished Copper.] [Light Maple.] [Pearwood.] [Welsh
Cherry] [Gold over Argent Silver.] [Gold over Pearwood.] [Custom Color:
[_____].] [As Scheduled.]
2.2 ACCESSORIES
The following paragraph is for constructing fire-resistant boxes over light fixtures in fire rated ceilings,
when so required.
A. Acoustic Sealant For Perimeter Moldings: Available from grid manufacturer.
B. Edge Moldings: J-Trim, color [_____] [to match ceiling panel], by Acoustic Ceiling
Products.
Specify one of the following adhesives, if surface mounted panels are used, or if panels must be adhered to
existing acoustic panels. The following two adhesives are known to work well with PVC panels, and
recommended by ACP.
C. Adhesive: Synthetic water-based adhesive [PL Latex FRP adhesive.] [PL Wall and
Tileboard adhesive.] [PL 100% polyurethane construction adhesive] [LN-950 Liquid Nails
Adhesive]
Include the notched trowel below if panels will be glued with a troweled adhesive.
D. Tools: Site-cutting tools, [and notched trowel] for installing panels.
Part 3 Execution
3.1 EXAMINATION
A. Section 01 71 00: Verification of existing conditions before starting work.