Specification

MATERIAL SAFETY DATA SHEET
MSDS DATE: Feb-2011
PAGE 3 OF 6
SECTION 7: HANDLING AND STORAGE
HANDLING AND STORAGE: Use with care. Wear gloves if necessary when cutting or fabricating. Store in a cool dry, well-ventilated area
away from sources of extreme heat or fire.
OTHER PRECAUTIONS: Use any methods that keep dust to a minimum. General storage procedures are acceptable
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
A: Component Exposure Limits
PVC (Chloroethylene, polymer) (9002-86-2)
ACGIH: 1 mg/m3 TWA (respirable fraction)
Titanium dioxide (13463-67-7)
ACGIH: 10 mg/m3 TWA
OSHA: 10 mg/m3 TWA (total dust)
Iron Oxide (1309-37-1)
ACGIH: 5 mg/m3 TWA (respirable fraction)
OSHA: 10 mg/m3 TWA (fume)
NIOSH: 5 mg/m3 TWA (dust and fume, as Fe)
Carbon black (1333-86-4)
ACGIH: 3.5 mf/m3 TWA
OSHA: 3.5 mg/m3 TWA
NIOSH: 3.5 mg/m3 TWA; 0.1 mg/m3 TWA (as PAH, carbon black in presence of polycyclic
Aromatic hydrocarbons)
Engineering Controls: Provide local exhaust ventilation that captures dust during sawing or sanding operations.
PERSONAL PROTECTIVE EQUIPMENT
RESPIRATORY PROTECTION: Use NIOSH/MAHA approved dust respirators as needed.
EYE PROTECTION: Wear safety glasses during cutting or fabricating process.
SKIN PROTECTION: Wear gloves and long sleeved clothing when cutting or fabricating.
OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Not applicable
WORK HYGIENIC PRACTICES: Do not eat, drink, or smoke in work area. Wash hands thoroughly after handling, especially before eating,
drinking, smoking, chewing, or using restroom facility
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Multi-colored Odor: None
Physical State: Solid pH: NA
Vapor Pressure: ND Vapor Density: ND
Boiling Point: ND Melting Point: ND
Solubility (H20) ND Specific Gravity: ND
Evaporation Rate: ND VOC: ND
Octanol/H20 Coeff.: ND Flash Point: ND
Flash Point Method: ND Upper Flammability
Lower Flammability Limit (UFL): ND
Limit (LFL): ND
Auto Ignition: ND Burning Rate: ND