Specification

Product Name
Fasade™ Decorative Thermoplastic Panels
Manufacturer’s Name
Acoustic Ceiling Products (ACP)
February 27, 2013 Page 5
PRODUCT DESCRIPTION
□ Rib
□ Diamond Plate
□ Current
□ Cyclone
□ Dunes
□ Echo
□ Typhoon
□ Lotus
□ Waves
□ Ripple
• OPTIONS
○ Border Fill panels (for use where partial panels are required around the perimeter of a room,
and indented panels cannot be cut in the middle).
○ Lay-In Panels: ACP HG-Grid suspended grid.
○ Grid Covers: ACP GridMAX finished to match panel styles and colors.
○ J-Trim, to finish wall edges; colors available to match all finishes.
PRODUCT PLACEMENT
• PREPARATION WORK
○ Perform installation as late as possible in the building process after any dust generating
activities have been completed.
○ Install grid in accordance with grid installation instructions.
• INSTALLATION / ERECTION
○ Plan room layout providing equal border widths on each side of room, in both directions.
○ Cutting Panels: Using a utility knife and straight edge, score the finish side of the panel.
Bend panel at the score mark and snap apart.
○ Surface Mounting:
■ Prepare substrate surface with primer.
■ Apply adhesive to substrate using a notched trowel. If a tube adhesive is used,
repeated pressing of tiles to substrate may be required.
■ Install J-Trim (if used), and border panels. Install full panels, working across the
room.
■ Overlap adjacent tiles 9 mm (3/8 inch) until ridges and dots align.
■ Once completed, firmly press all ceiling tiles to ensure proper adhesive bond.